Linux Netbooks – Greguti Thu, 06 Jan 2022 23:41:06 +0000 en-US hourly 1 Linux Netbooks – Greguti 32 32 E INK Onyx Boox Mira 13.3-inch monitor review Thu, 06 Jan 2022 05:42:13 +0000

The Onyx Boox Mira is a dedicated monitor with an E INK screen. It can be used as a primary monitor or a secondary monitor. It has an HDMI port on the monitor, which can be used to connect to your computer’s video card or to the video out port. The purpose of this display is to provide something that comes close to a true paper experience, while being pleasing to the eyes and not reflecting the glare of the sun.


The Onyx Boox Mira features a 13.3 inch Mobius E INK flexible electronic paper display with 16 levels of gray. The resolution is 1650 × 2200 with 207 PPI and has a capacitive touchscreen. It features white and amber LED lights to provide a rugged lighting experience and the warm lights are a perfect match for the proverbial candlelight effect. It has 2 buttons and 1 scroll wheel, to facilitate navigation and provide full screen refresh. There is no internal processor, no RAM or internal storage. This is a dedicated monitor, not a portable ebook reader or digital note-taking device.

Inside the box is a USB-C to USB-C cable and a mini HDMI to Full HDMI. The back of the Mira is silver and it also comes with a case that has a kickstand. When you close the case, it is held closed with the help of magnets. There are four holes which are pre-drilled and this is used for a VESA mount. At the bottom are two rubber stoppers, and on the sides are the USB-C ports, HDMI ports, and some of the switches. The front of the device has a white frosted bezel and a gray e-paper display. The screen is not flush with the bezel and is sunken, which provides a really crisp display, as there doesn’t appear to be a layer of glass.

You need to download software to get the most out of Mira. You can download it for Win64, Win32, Mac and Linux. Once you have downloaded and installed it there are many benefits. It has 28 different speed modes to create and tailor the experience to your needs. Speed ​​modes will need to be fine-tuned to find the optimal settings for specific tasks. Some are geared toward seamless internet browsing, while others are geared toward programming, where latency will play a role. You can optimize watching videos, reading books, or any other task that you would need from a secondary display. Most people who broadcast, for example, need to watch their chat, and you won’t have a problem refreshing it as each comment streams in. I really like the video mode, you can watch videos at around 25 frames per second. You don’t get the same kind of experience as a normal monitor, which typically has 60fps, but it’s really cool to see how far E INK has gone, with some software tweaks.


Dasung has generally cornered the market when it comes to primary or secondary monitors. The company has released 6 different models over the years, and the Dasung 253 looks particularly interesting with the 25-inch display. Onyx has its own 25-inch monitor, called the Mira Pro, although this product is basically only available in China at the moment.

The Mira, with its 13.3-inch display, will work with most desktop setups. It’s the perfect size to function as an extension of your laptop, netbook, or other portable device with an HDMI port. If you have a typical PC or MAC and need a secondary display for your workflow, the Mira will meet your needs.

Why buy the Mira? It does not emit any backlight, so it is very easy on the eyes. It has the same e-paper screen as the Kindle or Kobo e-readers, it’s just a lot bigger. Many people suffer from eye strain when looking at traditional LCD / LED or OLED screens, you will not have this problem with this product.

Onyx Boox Mira

$ 799.99

Onyx Boox Mira

Internet experience

4.5 / 5


  • Great design
  • Easy to use
  • All accessories are included
  • 28 different speed modes

The inconvenients

  • Expensive
  • Can only be used as a monitor
  • No SD
Source link

8 lightweight Linux distributions ideal for Intel Atom processor PCs Wed, 05 Jan 2022 16:00:00 +0000

Intel’s Atom processor is a line of low-voltage microprocessors that first appeared in 2008. They power many ultra-portable devices, such as netbooks, net-tops and tablets. But the Atom, energy efficient, quickly showed its limits to stay in step with current software.

That doesn’t mean you should let your Atom-powered device collect dust in a closet! You can bring it back to life with a Linux distribution. Linux operating systems generally use less system resources than their Windows counterparts, and there are plenty of options.

Here are the best lightweight Linux distros for netbooks with Intel Atom processors.

A screenshot of Puppy Linux Distro
Image Credit: Jpadilla811 / Wikimedia Commons

Puppy Linux has a small memory footprint (or paw print). It is around 300MB and can live on flash drives and DVDs. You can even run the entire operating system from RAM. This gives a fast experience on any device, overcoming the hard drive’s slow read-write speed. This makes Puppy Linux one of the best Linux distros for old PCs and netbooks.

Puppy Linux versions are based on long term support releases of Ubuntu, so you can keep this desktop installed for a long time, making it an ideal Linux choice for netbooks with Atom processors.

To download: Linux Puppy


A screenshot of the Lubuntu distribution
Image Credit: Mahtamun Hoque Fahim and the Lubuntu Community / Wikimedia Commons

Lubuntu is presented as both light and fast. It comes with the LXQt desktop environment and provides a good Linux netbook desktop for people who don’t want to tinker with their computer too much.

The system requirements are not demanding. Lubuntu’s website recommends 1 GB of RAM for heavy-duty web applications like YouTube, Facebook, and Google Docs.

To download: Lubuntu

A screenshot of the Mint MATE Linux distribution
Image Credit: Clément Lefebvre / Wikimedia Commons

When it comes to Linux distributions, Mint is one of the more popular options. This distribution based on Ubuntu and Debian has a simple and modern elegance. It’s also quite user-friendly. Apps and multimedia codecs are easy to find.

There are several variations of Linux Mint available, with MATE and Xfce practically linked as excellent examples of Linux desktops for Intel Atom processors. Both are well suited for netbooks and most underpowered computers in general. Of all the distros on this list, Mint offers arguably the most functional and complete experience.

While we selected Linux Mint for its particular appeal to newcomers, pretty much any distro running MATE or Xfce will work, too. If you prefer Ubuntu, Fedora, or openSUSE, give them a try instead. Compared to the other options on this list, MATE or Xfce may perform better on netbooks with more RAM.

For more information, see our comparison of Mint and Ubuntu.

To download: Linux Mint

A screenshot of the BunsenLabs distribution
Image Credit: VARGUX / Wikimedia Commons

As lightweight Linux distributions go, BunsenLabs is one of the lighter weight offerings. It’s a continuation of CrunchBang, which eschewed the traditional desktop environment in favor of a revamped version of the Openbox window manager.

While this Debian-based distro is a Linux perfectly suited for Intel Atom processors, its spartan design may not be right for everyone. You won’t find the eye candy you see in Lubuntu or Linux Mint.

BunsenLabs isn’t the only distro carrying the CrunchBang torch, but they seem to be the most active. Another option is CrunchBang ++. If you are feeling adventurous, you can run a continuous version based on Arch Linux called ArchBang.

To download: BunsenLabs

A screenshot of Porteus Distro
Image Credit: Blaze / Wikimedia Commons

Small, fast, and bootable from a variety of storage media, Porteus is one of the best Linux distros for Intel Atom netbooks. At less than 300MB, it’s super efficient, comes in 32- and 64-bit packages, and can run only from RAM.

Note that Porteus is modular, so rather than using a package manager and connecting to the Internet during the initial installation, Porteus provides precompiled modules that you can enable or disable before installation.

It all comes together in an efficient experience that can boot in under 30 seconds, making Porteus a superior version of Linux for netbooks.

To download: Porteus

A screenshot of the Elive distribution
Image Credit: Lugli Stefano / Wikimedia Commons

Fancy a unique Intel Atom Linux experience? Meet Elive, a very small Linux distribution with its own custom desktop environment. A bunch of apps and a few games are preinstalled. They appear on a dock at the bottom of the screen.

Elive is not designed for newcomers or businesses. Who is it for ? Let the development team tell you:

“Elive is not for beginners. Elive is not for experienced people. Elive is not for businesses or personal users. Elive is art. It’s just for people. who appreciate it and want to use it. Don’t hesitate to try Elive, because only you decide what you want in this world! “

While it’s not clear Who Elive is for, we know What Elive is for old or underpowered machines. The minimum requirements for Elive are 500MHz processor speed, 192MB RAM, and 700MB hard disk space.

To download: desire

A screenshot of the Bodhi Linux distribution
Image Credit: оманОС / Wikimedia Commons

If your Intel Atom netbook is a secondary computer, why not use it to run software that you might be too nervous to run on your primary machine? Consider Bodhi Linux. This little Linux project has been around for years. It doesn’t have the manpower you find in big projects, but it is functional.

With Bodhi Linux running on a netbook, you can follow the work in progress on the quirky and relatively unknown Moksha desktop interface. It might convince you of comparable experiences like LXQt and Xfce.

Bodhi Linux requires at least a 500 MHz processor, 512 MB of RAM, and 5 GB of hard disk space. So you can easily install it on your netbook with Intel Atom processors like n270 series.

To download: Bodhi Linux

A screenshot of wattOS Distro
Image Credit: wattOS / Planetwatt

While you take a look at the lightweight and funky Linux distros, add wattOS to your list. The gist of wattOS is to remove Ubuntu from all non-essentials and then add the i3 tile window manager. The “Microwatt” edition only requires 192MB of RAM and 700MB of hard disk space.

If you prefer a more common interface, try the LXDE edition instead. It needs a bit more RAM, but even on Intel Atom netbooks that’s probably okay.

To download: wattOS

Will you be using Linux on your Intel Atom netbook?

When Intel Atom netbooks first appeared, the creators saw an opportunity for Linux to thrive on smaller devices. Ubuntu made a netbook edition. KDE too. Pretty OS was essentially a Chromebook before the arrival of Chromebooks. One of our favorites was a project called Moblin, which turned into MeeGo, but is now gone.

In the end, most manufacturers chose to ship the already outdated Windows XP desktop rather than take a chance on Linux.

Yet despite the number of years that have passed, the Intel Atom and Linux netbooks remain a good couple. If you need help installing any of the above options on your netbook, here’s a quick guide to installing Linux.

How to Install Linux on Any PC or Laptop

Want to install Linux but think it could be a disaster? Installing Linux on a PC or laptop is easier than you might think – here’s what you need to know.

Read more

About the Author

Source link

What is CloudReady? Is this a viable alternative to Chrome OS? Tue, 04 Jan 2022 05:54:42 +0000

CloudReady is becoming popular, especially among people with low-end hardware. So I decided to take a look and share my findings with you in this article.

What is CloudReady?

CloudReady is an operating system based on the open source Chromium OS code base from Google. Neverware, the organization behind CloudReady, has developed the CloudReady operating system for deployment on existing PC and Mac hardware and guarantees improved performance on said hardware due to its minimal hardware requirements. Basically, CloudReady turns your old computer into Chromebooks. Neverware was bought by Google itself at the end of 2020.

Before I share my experience and opinion on this, let me tell you a little more about it.

Who should you try CloudReady?


CloudReady is primarily aimed at institutions that would benefit from Chromebook-like devices, but have already invested in hardware. Here are a few examples that come to mind:

  • The user interface of Chromium OS and, by extension, CloudReady is simple enough that there is rarely a need to retrain staff to switch from macOS or Windows to the CloudReady user interface.
  • Better security because users cannot install traditional apps containing malware available for macOS and Windows.
  • Chromium OS has few hardware requirements, so it’s pretty much guaranteed to work on your old hardware.
  • Computer management via the Google administration console.
  • Relatively easy initial setup.

Here are the minimum hardware requirements to run CloudReady:

  • CPU : Any processor made available after year 2008 should work (no mention of ARM processors, so assume only X86 – Intel and AMD – processors are supported)
  • RAM : 2 GB or more
  • Storage : 16 GB or more
  • Full BIOS or UEFI access – to boot from USB installer

If you are wondering if your current netbook works well with CloudReady, Neverware has released a list of netbooks certified to run CloudReady. Currently, more than 450 models are certified. You can compare your model to the official listing on this link.

How does CloudReady compare to Chrome OS?

If your primary goals are any of the following, you’ll be happy with CloudReady:

  • Manage CloudReady devices with the Neverware Admin Portal (until the Google acquisition is complete) or through the Google Admin Console.
  • Work in your organization can be done in a web browser (using web services).

When you hear the words “This is a Chrome OS based operating system,” you assume that at the very least, it can run Android apps.

Unfortunately, it is not the case. There are no support for android Framework / Runtime Service (ART) for Chromium OS open source, and therefore not available in CloudReady. Neverware did not pursue adding Android Runtime to CloudReady for several legal and technical reasons.

Which, in turn, prevents you from even loading an APK, as nothing can run those Android apps.

When I tried to launch Play Store from the app drawer, the Google Play Store webpage was opened for me in the browser. So bad news in that regard… But, since CloudReady is based on a “web-centric” operating system, my Chromium browser extensions seem to work fine.

07 app drawer
A screenshot of the app drawer in CloudReady with the Google Play Store app icon (which redirects you to the web page in Chromium) as well as the Chrome extensions as “apps”

So if you’re looking to use your old laptop as a non-touch tablet with CloudReady, you’re out of luck.

Why does CloudReady exist?

You might have wondered if Chrome OS already exists, why has Neverware spent its resources creating a “clone” called CloudReady?

If you take a close look at the devices that are running Chrome OS, they are pre-built. Which indicates that Chrome OS is only available to OEMs that make Chromebooks.

Unlike Microsoft’s Windows, where OEMs get Windows to preload their laptops and / or desktops and provide users with an installation ISO, Google doesn’t provide you with an ISO that you can use to install Chrome OS on your computer. computer.

Hence the need to create an operating system based on the Chromium OS code base. Something you can install on your already existing PC and Mac hardware.

In addition to providing you with a way to install the Chromium OS based operating system, Neverware provides options for corporate users who would like official support for their operating system. You get this with CloudReady.

Prepare for the cloud

cloudready screenshot
CloudReady screenshot

CloudReady offers three editions: Home Edition (free), Education, and Enterprise (both paid). If you want to try it out first, the obvious choice will be to use the Home Edition first.

Neverware does not provide you with ISO. But, Neverware gives you a tool to create bootable USB drives with their USB Maker tool, it is only for Windows.

Neverware also provides you with a RAW file which you can use to manually create a bootable USB drive from any operating system using the Chromebook Recovery Utility extension from any browser based. Chromium.

Since Neverware does not provide ISO, if you want to try it out as a virtual machine, Neverware provides an “.ova” file. But, this “.ova” file will not work with VirtualBox. It is intended for use with VMware.

Ubuntu Web: an alternative to ChromeOS and CloudReady?

If you are hoping to use CloudReady on your old computer or laptop but are disappointed that ART is missing from CloudReady, maybe give Ubuntu Web a try.

ubuntu web screenshot
A screenshot of Ubuntu Web

As the name suggests, this is a Linux distro that is aimed at people looking for alternatives to Chrome OS.

Ubuntu Web has the same familiar Ubuntu base that gives you the ability to sync with / e / Cloud – a privacy-focused alternative to Google’s cloud sync services.

Best of all, Ubuntu Web comes with Waydroid by default.

If you are new to Waydroid, this is a “container-based approach to booting a full Android system on a standard GNU / Linux system“. Which means it will run your Android apps (unlike CloudReady).


While you might think that CloudReady doesn’t have much compared to Chrome OS, this seems like a good option for organizations that want to deploy a centrally managed, Chromium OS-based operating system, but don’t want to invest in Chromebooks.

This could also be a good option for home users with low-end hardware, but we already have a lot of lightweight Linux distros for it.

Have you used CloudRead before or are you first hearing about it here? What is your overall opinion on this project?

Source link

How to run Unetbootin on Debian 11 Bullseye Wed, 29 Dec 2021 14:16:28 +0000

UNetbootin is an open source program to install on Windows, Linux, and macOS. It is intended for creating bootable USB drives using ISO images. Here we learn the commands to run UNetbootin on Debian 11 Bullseye.

The “Universal Network Boot Installer”- Unetbootin for short – extracts ISO files and modifies some operating system installation packages and saves them directly to a USB drive. For example, if you want to run Ubuntu in the Live environment from the USB stick or if you want to install the operating system from the USB stick to the hard drive. Especially for users of laptops or netbooks without an optical drive, UNetbootin offers the option of installing ISO images. In the drop-down menu of this software, under “Distribution”, you will find a whole list of available tools and distributions. Besides Ubuntu, it supports a large number of distributions, for example Fedora, Gentoo, Damn Small Linux, etc.

Additionally, an existing ISO image can also be used to create a brand new distribution USB stick, for example, which is not yet directly supported by UNetbootin.

How to use Unetbootin on Debian 11 Bullseye

1. Download Unetbootin

The packages to install the Unetbootin bootable USB maker are not available in the Debian 11 Bullseye base repository. Therefore, we have to download it manually, use this GitHub link given here. It’s a bin file, so portable to use. On the publication page download unetbootin-linux64-xxx.bin to file.

2. Make the file executable

Once you have the Bin file on your Debian 11 system, open the command terminal and go to Downloads directory, that’s because whatever we download from the browser goes there.

cd Downloads

Change the permission and make the file executable.

chmod +x ./unetbootin-linux64-*.bin

3. Run Unetbootin on Debian 11 Bullseye

Now use the sudo user and run the Unetbootin bin file to get the GUI to download and create a bootable USB drive on your Debian system.

sudo ./unetbootin-linux64-*.bin

4. Create a bootable Linux USB key

Once you have the graphical user interface, plug the USB drive into your system. After that, there are two ways to create a bootable USB drive. First, if you don’t have the Linux ISO file you want, you can get it from the list of distributions. Whereas, those who have ISO files, should select the Disk Image option and then from the drop down list of the USB drive, select the To drive after that hit the Okay button. Wait a bit and you will have your USB drive to install Linux.

Create USB Unetbootin on Debian 11 Bullseye

Other articles:

How to use Fedora ISO to create a bootable USB drive
How to Create a Rocky Linux 8 Bootable USB Flash Drive
Create a Debian 11 Bullseye Bootable USB Flash Drive

Source link

The ONEXPLAYER 7 inch Portable Mini Gaming PC is smaller (but thicker) than the ONEXPLAYER 8.4 inch Tue, 28 Dec 2021 17:20:41 +0000

The ONEXPLAYER line of portable gaming computers is growing. After launching the original model with an 8.4-inch display and an Intel Tiger Lake processor earlier this year, One Netbook followed with an AMD edition in November.

The following ? the ONEXPLAYER Mini, which is a smaller model with an Intel processor and a 7 inch screen. It was recently pre-ordered in Japan and is expected to start shipping worldwide soon. But now that some people in Japan have been able to get their hands on the Mini, we have a better idea of ​​how much smaller it is than the original.

Above: ONEXPLAYER / Below: ONEXPLAYER Mini (PC Watch)

We already knew from the datasheet that the ONEXPLAYER Mini was physically smaller and lighter than the 8.4 inch models, albeit a bit thicker:

Device Dimensions Screen size Weight
ONEXPLAYER Mini 7 inch 262 x 108 x 23 mm 589 grams
UNEXPLAYER 8.4 inch 280 x 128 x 25 mm 825 grams

But it can be difficult to get an idea of ​​what that looks like just based on numbers.

Fortunately, recent PC Watch and Daily Gadget reviews include a few shots of the 7-inch ONEXPLAYER Mini alongside the 8.4-inch model. Overall, it really looks like it should be a bit more comfortable to hold in your hands… if you’re willing to ditch a larger, higher-res display that’s also apparently a bit brighter.

Helpfully, Daily Gadget also added a Nintendo Switch to the comparison, making it clear that even the new Mini model is wider than Nintendo’s handheld game console.

The ONEXPLAYER Mini features a 1920 x 1200 pixel touchscreen, Intel Core i7-1195G7 processor, 16GB of RAM, and 512GB to 2TB of PCIe 3.0 x3 NVMe solid-state storage.

It also has two USB4 Type-C ports, a USB 3.0 Type-A port, a 3.5mm audio jack, front-facing stereo speakers, a 10,455mAh battery. and support for WiFi 6 and Bluetooth 5.0.

The main sources of income for Liliputing are advertising and affiliate links (if you click the “Buy” button at the top of the page and buy something from Amazon, for example, we’ll earn a small commission).

But there are a number of ways to support the site directly, even if you use an ad blocker * and hate shopping online.

Contribute to our Patreon campaign


Contribute via PayPal

* If you are using an ad blocker like uBlock Origin and seeing a pop-up message at the bottom of the screen, we have a guide that can help you turn it off.

Source link

]]> When Dell Built a Netbook Using an X86 Modular System Sat, 18 Dec 2021 21:00:00 +0000

Just like with touchscreen cell phones packed with innovative and sophisticated features that everyone overlooks, there are areas that laptop makers previously ventured into but dared not touch anymore. On Twitter, [Kiwa] talks about a fascinating attempt by Dell to manufacture laptops with user-replaceable CPU + RAM modules. In 2008, Dell released the Inspiron Mini 1210, with its processor, chipset, and RAM soldered to a separate board in an “extended SODIMM” form factor – much like pre-CM4 Raspberry Pi compute modules! Apparently different versions of these “processor boards” existed for their Inspiron Mini line, with varying amounts of RAM and CPU power. With replacement CPU + RAM modules always sold online, these Dell netbooks are, to our knowledge, the only x86 netbooks with upgradeable processors.

You can try grabbing one of those replacement laptops or processor modules these days, if you like tinkering around with old tech – and you don’t mind having a poor experience even on Linux, thanks to the notorious lack of openness of the Poulsbo chipset. Unfortunately, Dell has given up on the concept of x86-module system boards altogether, and laptops have become less and less modular as we progress – we haven’t had socket processors since the third generation of Intel mobile cards, and even the RAM is soldered. to the motherboard more and more often. In theory, the “CPU daughter board” approach could improve manufacturing efficiencies and costs, allowing a larger, simpler board to be used for the motherboard and having only the high layered CPU board. . However, we can only assume that it was not profitable enough overall, even with all the theoretical advantages. Or, maybe, Google style, someone deleted this project internally due to some broken metrics.

If you think about it, a laptop motherboard is a single board computer; However, this is clearly not sufficient for our goals of scalability and repairability. If you’re looking to make your own way and upgrade your laptop regardless of the manufacturer’s intentions, here’s an old but impressive story about how to replace the soldered-in processor on the original Asus EEE, and a more recent one. on upgrading soldered RAM in a Dell XPS ultrabook. And if you’re looking for the goodness of backcalculation, Following [Kiwa] on Twitter is a must-see – the last time you saw the restoration and remodeling of a live blog from a Kaypro someone threw on the sidewalk.

Source link

ECS presents the Liva Z3 with Intel Jasper Lake processors Thu, 09 Dec 2021 07:27:03 +0000
ecs liva z3 1000×600.jpg

ECS has unveiled its new Liva Z3 mini-PCs, compact desktop computers, using low-power Intel Jasper Lake processors.

ECS delivers the series in two versions, Liva Z3 and Liva Z3E. The former is the smallest with dimensions of 117 x 128 x 35mm, while the latter is a bit bigger as it includes a 2.5 bay for users who want to add additional hard drives or SSDs. to M.2 PCIe slots for on-board storage.

DHW Liva Z3

Its hardware base uses the Jasper Lake platform. These are the latest Intel processors designed to power entry-level PCs, from small netbook-style laptops to compact desktops like these mini-PCs. They offer basic performance for computing and multimedia entertainment, very low power consumption and a price which is generally the lowest of processors for Intel PCs.

The processors use the new Tremont architecture and are built on 10nm technological processes. Intel offers three versions on this platform (Pentium Silver N6000, Celeron N5000 and Celeron N4500) which are those that ECS offers as an option for its Liva Z3. It includes two So-DIMM slots to incorporate up to 16GB of dual channel DDR4 memory and supports eMMC storage, PCIe SSD, and the aforementioned SATA bay.

DHW Liva Z3

In terms of connectivity, it offers Gigabit Ethernet LAN, Wi-Fi 6 and Bluetooth 5.0, as well as a good number of ports: one USB 3.2 Gen 2 Type-C, three USB 3.2 Gen 1 Type A and two USB 2.0 Type A. The manufacturer specifies that its new mini-PCs support the connection to two screens 4K at 60 FPS thanks to HDMI 2.0 video outputs and a mini Display Port.

ECS presents the Liva Z3 with Intel Jasper Lake 31 processors

ECS (EliteGroup) promises a 35% increase over previous generation models with Atom chips thanks to the new features offered by the Jasper Lake platform. ECS targets the use of these mini-PCs in offices, consumer offices or as home theater systems. Support for operating systems Windows and linux. No sale price has been offered.

Source link

MINISFORUM JB95, a compact and economical PC Wed, 01 Dec 2021 08:04:17 +0000
minisforum jb95 1000×600.jpg

MINISFORUM JB95 is another model that the Chinese firm has added to its range of mini-PCs. Extremely compact desktops that you can place anywhere on the desk or living room, with enough performance for basic computing tasks (at least) and with generally pretty contained prices.

This is the case of the new model of a company which accumulates new models and very different furs every month. The MINISFORUM JB95 is intended for the range based on entry-level processors Intel Celeron N5095. A development of the ‘Jasper Lake’ series with which Intel was targeting budget PCs, whether small entry-level laptops or netbooks, including mini-PCs like this in square format with a size of 12.7 cm and a height of 4.6 cm.

MINISFORUM JB95, specifications

This CPU is manufactured using 10nm technological processes under the new “Tremont” architecture. He has four processing cores, they can scale up to a frequency of up to 2.9 GHz and an Intel UHD graphics GPU with 16 execution units that reaches 750 MHz. Obviously, this will not allow you to play demanding games, but it will be sufficient for office automation and multimedia.

In this regard, it should be noted that it has two HDMI and Display Port outputs to which you can connect monitors and transport content with 4K resolutions. On the back, it also offers a USB Type-C port for power and two more USB 3.0 Type-A ports for data. He understands a Gigabit Ethernet connector and supports Wi-Fi 5 and Bluetooth 4.0.


On the front there are two USB 3.1 Type-A ports, another USB Type-C and a headphone jack. There is also a CMOS reset button in case you need to restore the JB95 to its factory settings.

MINISFORUM JB95, a compact and economical PC 33

Inside it includes 8 GB DDR4 memory module and another free for the user’s extension. For storage, mount an M.2 2280 SSD with a capacity of 128, 256, or 512 GB, plus a 2.5-inch bay for additional SATA storage, whether hard drive or hard drive. ‘an SSD drive.

The MINISFORUM JB95 includes a preinstalled Windows 10 Pro license (although Linux can be installed without major problem since the company supports it in other models) and is available on the international channel on sites like Geekbuying. It is also available on Amazon Spain in different configurations depending on the capacity, the version with 128 GB SSD for 319 euros and the 256 GB version for 339 euros.

Buy on Amazon

Moderate price for a compact table top that you can set up anywhere in a consumer office, office or home theater room.

Source link

Where can you buy a preinstalled Linux laptop? Thu, 25 Nov 2021 18:00:00 +0000

Linux has grown into a perfectly capable and easy-to-use operating system, but where can you actually buy a Linux laptop? You won’t find them in big box stores other than Chromebooks. Fortunately, this is less of a problem as more of us shop online. Now it’s just a matter of where to look and what to look for.

Here is a list of big companies, small businesses, and resellers who are happy to sell you a laptop with Linux preinstalled.

linux computers from Dell site
Image Credit: Dell / Dell

Dell was one of the first major manufacturers to offer desktop Linux preinstalled on a laptop. In the past, these machines were hidden away, but the company has since made them much easier to find. You can now buy XPS, Precision, and Latitude laptops that come with Ubuntu.

As you may have noticed, these are Dell machines for business. You do not have the option to select other Dell lines such as Inspiron or Alienware and choose to swap the operating system.

Image Credit: Lenovo / Lenovo

Are you looking for a more diverse range of options? Lenovo delivers. The multinational offers many ThinkPads that come with Linux preinstalled. There are the standard ThinkPads known to be rugged, or you can try the X1 Carbon or the X1 Yoga 2-in-1.


Lenovo offers Ubuntu, but the options don’t end there. The company worked with Red Hat to certify these devices for the latest version of Red Hat Enterprise Linux, and some models even come with optional Fedora preinstalled.


System76 is an American company that manufactures a variety of Linux laptops, ranging from 14 to 17 inches. Much of the hardware is renamed Clevo plastic machines, but the company has invested in designing its own hardware, as is the case with Thelio desktops.

System76 produces Pop! _OS, a Linux distribution preinstalled but also available for anyone to download and use for free on their own non-System76 computers. Pop! _OS has since grown into one of the best known Linux distributions for its ease of use.

Purism, also located in the United States, manufactures computers with privacy and security in mind. The company’s laptops are custom designed and offer minimal branding, although they come at a relatively high price point. Privacy switches are less of a novelty these days, but they were original when Purism first introduced them on its Librem laptops.

Purism devices all run PureOS, a Debian derivative approved by the Free Software Foundation. Rather than trying to differentiate PureOS from other distributions, Purism invests directly in improving the software provided by the community that PureOS depends on.

So the work to make GNOME more adaptive to run on a Librem 5 smartphone, for example, has benefited the entire GNOME community on desktops and mobile devices. The purchase of a computer from Purism supports this work.

Image Credit: Starlabs / StarLabs

StarLabs is a UK based Linux PC manufacturer. The company consists of a team of Linux enthusiasts who manufacture hardware to support the community and other Linux enthusiasts.

While the company once shipped renowned Clevo machines, the various models available now are custom machines. The Star Lite in particular is relatively unique as an 11-inch aluminum laptop that harkens back to the days of netbooks.

Rather than creating its own distro, Star Labs offers several choices. Depending on which one you choose, a portion of your purchase may go back to the distribution manufacturers.

laptop slimbook kde
Image Credit: Slimbook / Slimbook

Slimbook is a Spanish company specializing in the manufacture of Linux computers, offering your choice of many distributions as well as the possibility of preinstalling Windows. Slimbook offers a wide selection of laptops, all of which feature a premium look and feel. You can even buy some with Tux on the keyboard.

Slimbook worked with the KDE community to produce the KDE Slimbook, a laptop that came with the Plasma desktop preinstalled as well as the KDE branding on the back and on the Great key. While there are other ways to buy a computer with a plasma screen, this one is perhaps the coolest.

Pine64 quickly became one of the most well-known names in Linux hardware. Pine64 made headlines when it first released an $ 89 ARM-based laptop running Linux.

The Pinebook Pro followed later for $ 199 with more power under the hood. These machines aren’t powerful, but if you have a fairly light workflow and realistic expectations, the Pro can serve as the primary machine.

Pine64 has an online store, but orders often go out in batches and sell out quickly. So if you want to get your hands on any of these materials, be sure to follow Pine’s blog or other channels.

thinkpenguin website

ThinkPenguin is a Linux vendor approved by the Free Software Foundation. Unlike most of the other companies on this list, it will not only sell you a computer with your choice of Linux distro preinstalled, but also provide hardware that you can run without the need for proprietary drivers, even in the kernel.

ThinkPenguin doesn’t just supply machines. It provides a long list of peripherals that are guaranteed to work with your Linux computers. So even if you already have a Linux PC, ThinkPenguin can be a handy resource for finding anything from a printer to a fully open source router. And if you want to decorate your workstation with original stickers or mouse pads, these are also available.

Have you found your new Linux laptop?

Otherwise, you might be surprised to know that these aren’t the only options available. Whether you’re looking for a gaming rig or an old ThinkPad with all the proprietary bits removed, there’s someone out there that caters to your particular niche.

Since Linux has become too easy to install, it’s worth pointing out the possibility of browsing eBay or some other used source and buying any machine from a few years ago. Linux works great on older hardware and this approach also saves you money and prevents machines from going to landfill.

6 reasons to start buying used computers instead of new ones

Thinking of buying a new computer? Here’s why a used, refurbished, or used PC might be a better option for you.

Read more

About the Author

Source link

Guide: Install Linux on your PC Sat, 20 Nov 2021 22:43:05 +0000

This tutorial is about Guide: Install Linux on your PC. We will do our best to make sure you understand this guide. I hope you will like this blog Guide: Install Linux on your PC. If your answer is yes, please share after reading this.

Check out the guide: install Linux on your PC

You’re considering Linux as a replacement operating system, but there’s a problem: you don’t know how to install it. Switching to Linux can be pretty straightforward. Choose a Linux operating system (OS), write the installation media, and sit back and wait. But as simple as it is, there are complications. Here we show you how to install Linux on your PC with minimal effort.

Note about target device: You can use a desktop computer or a laptop to run Linux. Some versions of Linux are particularly suited to older hardware, such as low-end laptops and netbooks. If you are planning to do this, you should take the time to research your computer model to find the best Linux operating system for it. As a rule of thumb, when choosing a Linux distribution, first make sure that it will work with the hardware you plan to install it on.

How to install Linux on Windows 10

  • Linux is a family of open source operating systems. They are based on the Linux kernel and are free to download. They can be installed on a Mac or Windows computer. Here’s how to install Linux on a Windows 10 PC.
  • If you want to dual boot Linux and Windows, you will need to create space for your Linux operating system to live. To do this, you will need to partition your primary hard drive. Here’s how to do it:

How to partition a hard drive in Windows 10

  • Open the Windows search bar. It’s the magnifying glass icon in the lower left corner of the screen.
  • Then type “DISKMGMT.MSC” in the search bar and press Enter.
  • Right click on your primary hard drive and select Shrink Volume. If you have more than one drive, be sure to choose the one that says Primary Partition. Usually it will be labeled as C: drive.
  • Then choose how much you want to reduce your disk. It is recommended that you reserve at least 20 GB (20,000 MB) for Linux.
  • Finally, click Minimize.

How to make a bootable Linux USB drive

  • Download a Linux distribution in ISO format. An ISO file is a disk image. Some of the main options are Ubuntu, Mint, or Fedora. They can be downloaded for free from the main website of each distribution. For this article, we are using Ubuntu.
  • Insert the USB drive into your computer. You may be asked to format the drive. This will erase all data stored on your drive, so be sure to back up your files before you start.
  • Download Rufus. You can find the latest version of the app here.
  • Open Rufus and select your USB drive from the list of devices. If you don’t know which drive to use, eject all other drives until you have only one to choose from.
  • Under Boot Selection, click the Select button and choose the ISO file you downloaded earlier. Do not change other default settings.
  • Finally, click on Start. If you get a pop-up message asking you to select a mode you want to use to write the image to, choose ISO.

How to install Linux from USB

  • Insert a Linux bootable USB drive.
  • Click on the start menu. It’s the button in the lower left corner of the screen that looks like the Windows logo.
  • Then hold down the SHIFT key while clicking Restart. This will take you to the Windows recovery environment.
  • Then select Use device.
  • Find your device in the list. If you don’t see your drive, choose EFI USB Device, then choose your drive from the next screen.
  • Your computer will now start Linux. If your computer restarts Windows, there has been a problem with your drive or you may need to change your BIOS settings.
  • Select Install Linux. Some distributions also allow you to test the operating system before installing it here.
  • Follow the installation process. It will depend on the distribution you are trying to install. These details may include your WiFi network, language, time zone, keyboard layout, etc. You may also need to create an account with a username and password. Be sure to write down all the details, as you will likely need them in the future.
  • Most distributions will allow you to partition or erase your drive and perform a clean install during installation.
  • Restart your computer when prompted. If you have more than one operating system on your system, you will be taken to a GNU GRUB screen after restarting. This screen allows you to select the operating system you want to start.

Final words: Guide: Install Linux on your PC

hope you will understand this item Guide: Install Linux on your PC, if your answer is no, you can request anything through the contact forum section linked to this article. And if your answer is yes, then share this article with your family and friends.

Source link